Rat Smad1/MADH1 (Mothers Against Decapentaplegic Homolog 1) ELISA Kit | G-EC-05520
- 3 to 5 Working Days
Rat Smad1/MADH1 (Mothers Against Decapentaplegic Homolog 1) ELISA Kit | G-EC-05520 | Gentaur Elisa Kits
Target Species: Rat
Assay Time: 3.5h
Detection Type: Colormetric
Detection Range: 0.31~20ng/mL
UniProt ID: P97588
Target Name: Smad1/MADH1
Target Synonym: Mothers against decapentaplegic homolog 1, SMAD family member 1, SMAD1, BSP-1, BSP1, JV4-1, JV41, MADH1, MADR1
Tested Sample Types: Serum, plasma and other biological fluids
Test Principle: This ELISA kit uses the Sandwich-ELISA principle. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to Rat Smad1/MADH1. Samples (or Standards) are added to the micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Rat Smad1/MADH1 and Avidin-Horseradish Peroxidase (HRP) conjugate are added successively to each micro plate well and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Rat Smad1/MADH1, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by the addition of stop solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 ± 2 nm. The OD value is proportional to the concentration of Rat Smad1/MADH1. You can calculate the concentration of Rat Smad1/MADH1 in the samples by comparing the OD of the samples to the standard curve.
Specificity: This kit recognizes Rat Smad1/MADH1 in samples. No significant cross-reactivity or interference between Rat Smad1/MADH1 and analogues was observed.
Application: This ELISA kit applies to the in vitro quantitative determination of Rat Smad1/MADH1 concentrations in Serum, plasma and other biological fluids.
Research Areas: Cancer, Epigenetics and Nuclear Signaling, Signal transduction, Stem cells
Storage: An unopened kit can be stored at 2-8℃ for 1 month. If the kit is not supposed to be used within 1 month, store the items separately according to the storage table in the manual once the kit is received.